I tested this game-changing, sub-$100 Godox flash kit — and it’s the best portrait photography upgrade I’ve tried all year

August 21, 2026 at 09:27 AM

The Godox iT32 simplifies off-camera flash with its modular remote trigger It's available from just $79 / £87 (about AU$140), plus as a kit with your choice of trigger Wireless triggers covering leading camera systems are also available separately Price and technical complexity put most people off e

<![CDATA[ <article> <ul><li>The Godox iT32 simplifies off-camera flash with its modular remote trigger</li><li>It's available from just $79 / £87 (about AU$140), plus as a kit with your choice of trigger</li><li>Wireless triggers covering leading camera systems are also available separately</li></ul>Price and technical complexity put most people off ever trying off-camera flash photography — and if you're in that camp, I implore you to consider the Godox iT32. The Godox kit is the camera flash reimagined for today; it's simpler and cheaper than the others I've tried, and I had a blast using it with my Nikon, Canon and Olympus (OM System) camera gear. I shot portraits that popped, and which I simply couldn't have created by relying on available light alone. What's so different about the iT32? Well, it's built around a remote trigger, which snaps magnetically into the base of the flash itself, and secures to your camera's hotshoe. The trigger, called the X5, is available in five versions covering leading camera systems; Canon, Sony, Nikon, Fujifilm and Olympus / Panasonic — I used three of them for my review.This unique design simplifies off-camera flash: you can quickly switch from on-camera to off-camera flash — which you'll want to do for the best results — simply by pulling the flash off the remote trigger, which remains in the hotshoe. With some basic camera settings knowledge — which I'll share later in this article — off-camera flash really is a cinch. Heck, it's even fun. For other camera flashes, you'll need separate remote triggers and receivers attached to the camera and the flash respectively for off-camera flash, all adding to the cost and complexity of the setup. <figure role="gallery"><figure><img src="https://cdn.mos.cms.futurecdn.net/oSXUDHyjTRLTwNVAnQssKZ.jpg" alt="Godox iT32 camera flash attached to a Canon camera, held by photographer and TechRadar's Cameras Editor Tim Coleman" /><figcaption>Tim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/dRyiWkLibRYN4RE6H7jp2Z.jpg" alt="Godox iT32 camera flash alongside a Canon camera, held by photographer and TechRadar's Cameras Editor Tim Coleman, " /><figcaption>Tim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/D6krqDrt8QZw4vdewJGN7Z.jpg" alt="Close up of the Godox iT32 camera flash's X5 remote trigger attached to a Canon camera, held by photographer and TechRadar's Cameras Editor Tim Coleman" /><figcaption>Tim Coleman</figcaption></figure></figure>The iT32 also features a touchscreen to navigate settings, and it might surprise you just how innovative this feels, given that camera flash design has remained largely the same for decades, with most models featuring a basic LCD (or no screen at all). Furthermore, the iT32's internal battery charges via USB-C. Again, a regular-sounding feature in 2026, but most others still require AA batteries for power.Perhaps the best part of all is that the Godox iT32 costs a fraction of the price of old-fashioned proprietary alternatives from Nikon, Canon, Sony and others. It's available for just $79 / £87 (about AU$140), with your choice of remote trigger costing an additional $19-20 / £17-18 (about AU$30). Those prices can be even lower at retailers such as Amazon.Shoot with multiple camera systems? You can buy additional X5 triggers separately, again cutting the cost versus forking out for multiple flashguns for different cameras. The Fujifilm trigger costs $19 / £17, while the Sony, Canon, Nikon and Olympus ones costs $20 / £18). Godox sent me the iT32 flash with X5 triggers for Canon, Nikon and Olympus cameras for review (each manufacturer's hotshoe is the same size but with a unique pin design), and each version worked flawlessly for iTTL (through-the-lens metering) flash. For the gains you get, the iT32 could just be the best money you spend on camera gear this year. Let's dig into my experience with the Godox iT32 a little more, and why you might want to use it. <figure class="van-image-figure inline-layout" data-bordeaux-image-check ><div class='image-full-width-wrapper'><div class='image-widthsetter' style="max-width:2500px;"><img id="cUoUt2a9FAsPM4jUC2epnf" name="Godox iT32" alt="Godox iT32 camera flash attached to a Canon camera and placed on a wooden seaside bench, the ocean is behind it" src="https://cdn.mos.cms.futurecdn.net/cUoUt2a9FAsPM4jUC2epnf.jpg" mos="" align="middle" fullscreen="" width="2500" height="1406" attribution="" endorsement="" class="inline"></div></div><figcaption itemprop="caption description" class=" inline-layout">(Image credit: Tim Coleman)</figcaption></figure><h2 id="the-case-for-off-camera-flash">The case for off-camera flash</h2>I used to shoot with natural light at all costs. After all, flash photography can be a complicated business — the technique, the extra gear, not to mention the prohibitive cost — whereas available light felt simplest of all. There's no getting around it, though — sometimes you just need off-camera flash to lift portraits and still life photography. For me, flash has become an essential part of my setup for portraiture and weddings. And for me, the Godox iT32 quashes all of those hurdles getting started.<div><blockquote>for the first time, off-camera flash felt completely simple, even enjoyable. </blockquote></div>I came across the Godox kit when I spotted a fellow tech journalist using it at an event for <a href="https://www.techradar.com/cameras/compact-cameras/panasonic-lumix-l10-sample-gallery">the Lumix L10</a>. At first, it looked like a regular flashgun — the kind I've relied on for years — but then he pulled it off the camera and carried on using it as per usual. I grilled him about it, saw it in action, and knew that I had to get one for myself. You see, on-camera flash is one thing, like what you might have built into your phone or camera, but being able to direct light is another level, and that's what the iT32 enables in the most accessible way imaginable. The classic Rembrandt lighting, for example, is 45 degrees above and to the side of your subject. With the iT32, you can simply line up the shot, then remove the flash from the receiver on the camera and hold it manually to get that effect, then snap it back in place when you're done. For me, for the first time, off-camera flash felt completely simple, even enjoyable. Need to position the flash beyond your reach? Attach it to the supplied foot, which features a tripod mount, and rest it on a surface or attach it to a tripod/stand.<figure role="gallery"><figure><img src="https://cdn.mos.cms.futurecdn.net/ajFbZqyuDXvcUSxQ2Q3XiY.jpg" alt="Godox iT32 camera flash attached to a Canon camera, held by photographer and TechRadar's Cameras Editor Tim Coleman" /><figcaption>The flash attached to a Canon EOS R100 via the camera's hotshoeTim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/fE5Z9zv7j8Jj47jmhhDkbZ.jpg" alt="Godox iT32 camera flash alongside a Canon camera, held by photographer and TechRadar's Cameras Editor Tim Coleman, " /><figcaption>Want off camera flash, simply pull the flash unit away from the remote trigger, which remains attached to the camera's hotshoeTim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/rREWJBWtwPmPcr6sSa2cbZ.jpg" alt="Photographer and TechRadar's Cameras Editor Tim Coleman holding a Canon camera up to his eye, there's a Godox iT32 camera flash alongside to the camera" /><figcaption>The flash has a built in bounce card, plus it comes with a diffuserTim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/gBioxPhEgmJph8aNo2mNSY.jpg" alt="Godox iT32 camera flash alongside a Canon camera, held by photographer and TechRadar's Cameras Editor Tim Coleman, " /><figcaption>It's also equipped with a model light, which can be used as a light source in and of itself, but also help with focusing in low lightTim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/Sz492wXuGAtCQW5jdonU3Z.jpg" alt="Godox iT32 camera flash attached to a Canon camera, it's model light is on, held by photographer and TechRadar's Cameras Editor Tim Coleman" /><figcaption>Tim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/tn2wF7ymBfqvpKq52cS7uZ.jpg" alt="Flat lay of the Godox iT32 camera flash kit on a wooden table" /><figcaption>The flash kit, with addition X5 triggers I picked up given that I shoot with multiple camera systems. Tim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/48vLzbLoZjDyhMfHf5H4rZ.jpg" alt="Three Godox X5 remote triggers for the iT32 camera flash on a wooden table" /><figcaption>The X5 trigger 'N' for Nikon, 'C' for Canon and 'O' for OM System (Olympus) camerasTim Coleman</figcaption></figure></figure><h2 id="how-i-used-the-godox-it32">How I used the Godox iT32</h2>In addition to composing your shot and understanding where to position the flash, you'll need to know what flash settings to use for any given situation. A two second hold of the power/test button turns the flash on (the button illuminates green), followed by a swipe up of the screen — this two-step process confirms you didn't accidentally turn the flash on. From here, exposure compensation can be dialled in (manually adjusting the brightness of the flash) by swiping the screen left or right, or scrolling the dial on the flash's side.The menu is accessed through the menu button or by swiping down the touchscreen, where you'll find the option for a model (continuous) light, the flash modes and more. There are iTTL, manual and multi-strobe flash modes, plus options for rear curtain, front curtain and high-speed flash. I tend to rely on iTTL (through-the-lens auto exposure metering), which is available with the flash physically or wirelessly attached to the X5 trigger, and experiment with exposure compensation for each scenario. Sometimes I just want a little fill light so will dial in negative exposure compensation, other times I'll want punchy lighting for which I might not make any changes at all. In any case, the maximum power of the flash is impressively bright.<figure role="gallery"><figure><img src="https://cdn.mos.cms.futurecdn.net/9TFGVjXN2UcZvhraBdJbif.jpg" alt="Closeup of the Godox iT32 camera flash and its rear display, the ocean is behind it" /><figcaption>Tim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/PaTG8vvuQ3B5ZtkReBbkkf.jpg" alt="Closeup of the Godox iT32 camera flash and its rear display, the ocean is behind it" /><figcaption>Tim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/ZsXndUE2z2qzE6Q3R6Nnkf.jpg" alt="Closeup of the Godox iT32 camera flash and its rear display, the ocean is behind it" /><figcaption>Tim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/mpv4oacvNX2iiPKpWMQjaf.jpg" alt="Closeup of the Godox iT32 camera flash and its rear display, the ocean is behind it" /><figcaption>Tim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/sXwfiCKzHJyxdWWBtPKPYf.jpg" alt="Closeup of the Godox iT32 camera flash and its rear display, the ocean is behind it" /><figcaption>Tim Coleman</figcaption></figure></figure>For the manual flash mode, flash brightness is adjusted in the same way as exposure compensation for the iTTL mode. You won't generally need to bother with the on-camera / sender / receiver menu options since the flash automatically switches modes when you attach or detach the flash from the X5 trigger. I only had a single iT32 flashgun for my testing, but it is possible to sync multiple flashguns and control the brightness as a group using the basic controls on the remote trigger. If you want different brightness values for multiple flashes — say the main front flash at full value and a side or rear positioned flash as a dimmer fill light, then those values need to be dialled in on the flashgun itself when it's off-camera — something to bear in mind if the flashes aren't easily accessible in your setup.<figure role="gallery"><figure><img src="https://cdn.mos.cms.futurecdn.net/hassjLCqyHQMyJEv2Re5TU.jpg" alt="Low light portrait illuminated with the Godox iT32 camera flash " /><figcaption>With off camera flash, even with a single light source, you can shape the light for more dramatic shadowsTim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/rgCPPGF8xdzbXGWxAQAxPU.jpg" alt="Low light portrait illuminated with the Godox iT32 camera flash " /><figcaption>Here the flash is attached to the camera. Lighting is flatterTim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/MhwkVscabg9sVcjRaAxMMU.jpg" alt="Low light portrait illuminated with the Godox iT32 camera flash " /><figcaption>This portrait makes use solely of the model light, no flashTim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/R3TMtAPVSg7jsxfPHGS5JU.jpg" alt="Low light portrait illuminated with the Godox iT32 camera flash " /><figcaption>And here there's no flash or model light at allTim Coleman</figcaption></figure></figure>With iTTL in play, I set camera exposure settings manually, mainly because I usually want background detail to come through too rather than it being mostly black or seriously under exposed.The flash sync speed of most cameras maxes out at around 1/250sec, but 1/160sec is a safe bet. An aperture of around f/11 tends to make a correct exposure in daylight, while a brighter aperture with shallow depth of field, say f/2.8, can be possible in low light at night or indoors.<figure role="gallery"><figure><img src="https://cdn.mos.cms.futurecdn.net/3WuHMfj3MoYZa4BdaktFeU.jpg" alt="Low light portrait illuminated with the Godox iT32 camera flash " /><figcaption>Dialling in a high ISO helped to bring through the color and detail of the sunset in this portraitTim Coleman</figcaption></figure><figure><img src="https://cdn.mos.cms.futurecdn.net/BEtSGgahtZZt29LAZX6WXU.jpg" alt="Low light portrait illuminated with the Godox iT32 camera flash " /><figcaption>Tim Coleman</figcaption></figure></figure>An ND lens filter will unleash a brighter aperture in daylight for shallow depth of field (or a camera like the <a href="https://www.techradar.com/cameras/mirrorless-cameras/the-sony-a9-iii-is-the-best-camera-ive-ever-used-for-flash-photography-portraits-heres-why">Sony A9 III with its global shutter</a>). I then use a high ISO setting which brings through some of the background detail. For the portraits I took at golden hour, my camera settings were 1/160sec, f/11 and ISO 3200, with the flash set to iTTL and the power adjusted with -0.7EV exposure compensation. Those settings are a good starting point to experiment from, but they of course depend on how bright the ambient light is. Having used two flashguns for years that each require 4x AA batteries, I really appreciated the USB-C charging of the iT32 — a port that can also be used for firmware updates, say adding compatibility with future cameras. The X5 remote trigger also has a built-in battery, and this receives charge when docked in the iT32 flash. The LCD screen displays battery life of both units, and if you run into any off-camera pairing issues, docking the flash back in the trigger will do the trick. <figure class="van-image-figure inline-layout" data-bordeaux-image-check ><div class='image-full-width-wrapper'><div class='image-widthsetter' style="max-width:2500px;"><img id="VW9njC6XAnCWaeAbKe5mTZ" name="Godox iT32" alt="Photographer and TechRadar's Cameras Editor Tim Coleman holding a Canon camera up to his eye, there's a Godox iT32 camera flash attached to the camera" src="https://cdn.mos.cms.futurecdn.net/VW9njC6XAnCWaeAbKe5mTZ.jpg" mos="" align="middle" fullscreen="" width="2500" height="1408" attribution="" endorsement="" class="inline"></div></div><figcaption itemprop="caption description" class=" inline-layout">(Image credit: Tim Coleman)</figcaption></figure><h2 id="the-perfect-package">The perfect package?</h2>Is the Godox iT32 the perfect package? No quite for pros — there's no multi-channel feature for individually controlling brightness values from the main transmitter of complex multi-camera flash setups. However, for beginners and simple 1-2 light setups, with the features on board and low asking price, the iT32 is for me is the perfect gateway to off-camera flash. </article> ]]>

Read the full article on TechRadar

Read Full Article →